10333 - Model 333 CPU board is capable of compressing video to Ogg/Theora format with the frame rate of 30 fps at 1280x1024 resolution (12fps for 2048x1536). Verilog source files for the FPGA and the software source code are avalable at https://sourceforge.net/projects/elphel/.
10333b.pdf - schematics (Rev "B"), pcb layout 10313b_cam.pdf
Here are the sample clips made with the camera:
m021_300_1_70.ogg (12MB) - 1280x1024 - 30fps
j0011_5.ogg (16MB) - 1280x1024 - 6fps. This clip was made with the full 30 fps and then slowed down 5 times to make it easier for the player to decode
10313 - Model 313 CPU board -capable of 22 fps at 1280x1024 resolution (9fps for 2048x1536). Verilog source files for the FPGA and the software source code are avalable at https://sourceforge.net/projects/elphel/.
10313b.pdf - schematics (Rev "B"), pcb layout 10313b_cam.pdf
10313A.pdf - schematics (Rev "A"), same: 10313A_A4.pdf - format "A4", 10313A_A3.pdf - format "A3"
10313A_LAY.gif - board layout as GIF image (Rev "A")
10313a_04f.dxf.zip - archived DXF for PCB layout., 1 unit= 1 inch (Rev "A")
Model 323 camera includes 1-4 of 10313 CPU/compressor boards (10313), one sensor board (10324), and one power supply board (10325).
10324a.pdf - sensor board for kodak KAI-11000 CCD sensor: schematics (Rev "A"), pcb layout 10324a_cam.pdf
10325b.pdf - power supply board: schematics (Rev "A"), pcb layout 10325b_cam.pdf
Some of the first images made with the model 323 camera: test13_rot.jpeg (2.27MB) and ocean8_rot.jpeg (2.32MB),
10303 - CPU board
10303.pdf - schematics (Rev "0")
10303A.pdf - schematics (Rev "A") with Intel Flash (TSOP-48 package)
10303M.pdf - schematics (Rev "M") with Micron Flash (TSOP-56 package)
10303_CAM.pdf - PCB layout
10303_35f.dxf.zip - archived DXF for PCB layout., 1 unit= 1 inch
irf32112.pdf - FPGA schematics/code
verilog.zip
10303_PL.zip - parts list (inks, pointing to local datasheet files are broken)
cam_external.jpg - external trigger connection. Schematics (see 10303.pdf may also be useful)
10303_LAY.gif - board layout as GIF image
10304 - sensor board
10304A.pdf - schematics (Rev "0"/Rev "A")
10304B.pdf - schematics (Rev "B") - ZR32112 2/3" format chip
10304C.pdf - schematics (Rev "C") - ZR32212 1/2" format chip
10304A_CAM.pdf - PCB layout
10304_11.dxf.zip - archived DXF for PCB layout., 1 unit= 1 inch. (Rev "0")
10304a_8f.dxf.zip - archived DXF for PCB layout., 1 unit= 1 inch (Rev "A")
10304A_PL.zip - parts list (inks, pointing to local datasheet files are broken)
10314b_06f.dxf.zip - archived DXF for PCB layout., 1 unit= 1 inch (10314 rev "B")
10314B_CAM.pdf - 10314 rev "B" PCB layout
10305 - MCP control board
10305.pdf - schematics
10305_all.pdf schematics+PCB layout
10305_CAM.pdf - PCB layout
10305_14f.dxf.zip - archived DXF for PCB layout., 1 unit= 1 inch
10306 - high voltage power supply (mounted on MCP control board 10305)
10306.pdf - schematics
10306_CAM.pdf - PCB layout
10306_14.dxf.zip - archived DXF for PCB layout., 1 unit= 1 inch
10308 - Ext. trigger input, sync output and RS-232/RS-422/RS485 board
10308.pdf - schematics, same format "A4": 10308_A4.pdf
103081.pdf - cables/switchbox for 10308, same format "A4": 103081.pdf
10314 - Sensor board with Kodak KAC-1310
10314B.pdf - schematics, same format "A4": 10314B_A4.pdf
10314B_CAM.pdf - PCB Layout
10317 - Sensor board with FillFactory IBIS5-1300
10317.pdf - schematics, same format "A4": 10317_A4.pdf
10317_CAM.pdf - PCB Layout
10318 - Sensor board with Micron MT9M001 (MT9D001, MT9T001) image sensors
10318.pdf - schematics
10318_cam.pdf - PCB Layout
elphel_6.2.12.tar.gz-
changes/additions made to original files from ETRAX development board for the
models 313/323 cameras. It also contains the latest FPGA source (in /fpga subdirectory)
elphel_C303.3.2.6.tar.gz
- changes/additions made to original files from ETRAX development board for
the model 303 camera
Image acquired by the model 313 camera with Micron MT9M001 sensor and 2.6mm
wide angle lens -
direct_sun3.jpeg
Two of the traffic images made by Elphel.CN Inc., Shanghai, China (vehicle speed ~40mph, exposure - 1/1000sec,
f=50mm):
Quicktime (http://www.apple.com/quicktime) videoclips acquired with model 313 camera (Micron MT9M001, MT9D001, MT9T001 sensors)
v010.mov - (6.46MB) - Children jumping on a tramplin, 640x480x96fps (timescale = 15x, so the playback is 15 slower than the action)
z017_640480_4490_96fps.mov - (6.58MB) - Calibratin clip - running clock, 640x480x96fps (timescale = 15x)
z016_320240_4890_300fps.mov - (7.26MB) - Calibratin clip - running clock, 320x240x300fps (timescale = 15x)snakeriver3.mov - (7.85 MB)
snakeriver.mov - (17.41 MB)
Sample images acquired with model 303 (ZR32212PLC sensor)
FPN - fixed pattern noise elimination
raw.jpg - raw picture (as is) made with MCP image intensifier (active window is limited by FO taper and is smaller than the sensor)
processed.jpg - same picture after per pixel calibration
cam_mcp_color.jpg - photo of the
camera
cam_color.jpg - photo of the camera without
MCP image intensifier and MCP control board - it is still a network
camera running a web server over GNU/Linux
303.jpeg - picture (black and white) of model 303
camera made by other such camera
camcpu.jpg - processor board - view from
processor side. Big box - 24V to 3.3V DC-DC converter to utilize power
over Ethernet cable .
cammem.jpg - processor board - view from
memory side
303 camera used for bonding fiberoptic taper to CMOS sensor in a clean box
